End-Point Security

 Open Windows Firewall Ports 

Open an elevated command prompt

Copy and paste the following into the command prompt window and hit enter

netsh advfirewall firewall add rule name=“IRYS UDP Port 12234” dir=in action=allow protocol=UDP localport=12234
netsh advfirewall firewall add rule name=“IRYS UDP Port 12234” dir=out action=allow protocol=UDP localport=12234

netsh advfirewall firewall add rule name=“IRYS Network Dongle UDP” dir=in action=allow protocol=UDP localport=1947
netsh advfirewall firewall add rule name=“IRYS Network Dongle UDP” dir=out action=allow protocol=UDP localport=1947

netsh advfirewall firewall add rule name=“IRYS Network Dongle TCP” dir=in action=allow protocol=TCP localport=1947
netsh advfirewall firewall add rule name=“IRYS Network Dongle TCP” dir=out action=allow protocol=TCP localport=1947

netsh advfirewall firewall add rule name=“IRYS TCP Port 12235” dir=in action=allow protocol=TCP localport=12235
netsh advfirewall firewall add rule name=“IRYS TCP Port 12235” dir=out action=allow protocol=TCP localport=12235

netsh advfirewall firewall add rule name=“CEFLA TCP Port 12236” dir=in action=allow protocol=TCP localport=12236
netsh advfirewall firewall add rule name=“CEFLA TCP Port 12236” dir=out action=allow protocol=TCP localport=12236

netsh advfirewall firewall add rule name=“CEFLA Console Port 5790” dir=in action=allow protocol=TCP localport=5790
netsh advfirewall firewall add rule name=“CEFLA Console Port 5790” dir=out action=allow protocol=TCP localport=5790


White-listing Applications, Folders, and Processes

Be sure that the following are white-listed in all endpoint protection applications including Windows Defender. We highly recommend using PowerShell to perform these actions!
# Disable RealTime Monitoring

Set-MpPreference -DisableRealtimeMonitoring 1

# Disable Cloud-Delivred Protection

Set-MpPreference -MAPSReporting Disabled
Set-MpPreference -SubmitSamplesConsent Never

# Set Exclusions

Add-MpPreference -ExclusionPath “C:\NNT”
Add-MpPreference -ExclusionPath “C:\Program Files (x86)\Common Files\MyRay”
Add-MpPreference -ExclusionPath “C:\Program Files (x86)\Common Files\NewTom”
Add-MpPreference -ExclusionPath “C:\Program Files (x86)\iCapture”
Add-MpPreference -ExclusionPath “C:\iMAGERS”
Add-MpPreference -ExclusionPath “C:\Eaglesoft”
Add-MpPreference -ExclusionProcess “C:\Program Files (x86)\iCapture\iCaptureMonitor.exe”
Add-MpPreference -ExclusionProcess “C:\Program Files (x86)\iCapture\iCaptureNotificationArea.exe”
Add-MpPreference -ExclusionProcess “C:\Program Files (x86)\iCapture\iCaptureTwainToDisk.exe”
Add-MpPreference -ExclusionProcess “C:\Program Files (x86)\iCapture\iCaptureConnectionChecker.exe”
Add-MpPreference -ExclusionProcess “C:\NNT.exe”
Add-MpPreference -ExclusionProcess “C:\NNT_Bridge.exe”
Add-MpPreference -ExclusionProcess “C:\Eaglesoft\Shared\Eaglesoft.exe”